Stage Plot Maker

Stage Plot Template: Free Band Stage Plot Examples

A stage plot template is a ready-made layout for a common lineup. Load the closest one below, move things to match your rig and save the PDF.

Pick the template closest to your lineup

Most bands are variations on a handful of lineups, and venues see the same arrangements every week. Starting from a template saves the boring part, which is getting the basics in the right places, and leaves you to change the details that make your band different. The editor above includes five starting layouts. Load one, then drag things until the stage matches what you really bring.

Four-piece rock band

Drums usually sit upstage centre, because the kit is the largest object and the loudest. Bass and guitar stand on either side of the kit, each with an amp behind or beside them. The lead vocalist stands downstage centre, with a second microphone for backing vocals wherever the guitarist or bassist stands. Monitors go in front of each vocal position, and drummers often ask for a separate mix.

Folk or acoustic duo

Two stools downstage, each with a vocal microphone and either a microphone or a DI box for an acoustic instrument. Duos need few channels, so the plot is simple, but it is worth showing which performer sits stage left and which sits stage right. One monitor per person is a common request.

Jazz quartet

Piano or keyboard, double bass, drums and one lead instrument such as saxophone or guitar. Jazz sets are often quieter, so players tend to stand closer together and listen to each other directly, with fewer monitors. Show where the piano or keyboard sits relative to the drummer, because that decides how the instrument is amplified or miked.

Funk band with horns

The rhythm section occupies the back of the stage, with the horns in a row downstage or on one side so they can share a microphone position. This lineup runs to the most channels of the five, which is why the plot and the channel list need to agree. Horn players often share monitor mixes, so mark which monitor serves which position.

DJ or electronic set

A table at centre stage with a laptop or controller, power at the table, and one or two lines out of the DJ setup. If there is an MC or a live instrument, add a vocal position beside the table. Electronic acts need power more than microphones, so label where each device plugs in.

Stage left and stage right: whose left?

Stage directions are given from the performer's point of view, facing the audience. Stage left is the performer's left, which is on the audience's right. Confusion here is the most common reason for a monitor or a guitar amp appearing on the wrong side of a stage. When you label a plot, add a note that says the audience is at the bottom of the drawing, so the sound engineer reads it the way you drew it.

Number the channels once and keep them

Every item on the plot that needs a microphone or DI box carries a number, and the same number appears in the input list. Once you have sent a plot to a venue, avoid renumbering. The engineer may already have written the numbers on a console strip or a patch sheet. If the lineup changes, add new numbers at the end of the list instead of shifting the existing ones.

The editor assigns the numbers as you place gear and keeps them identical on the canvas and in the channel list. For more on ordering conventions, microphone choices and phantom power, see the input list template guide.

How to adapt a template in four moves

  1. Swap what is different. Remove instruments you do not bring and add the ones you do, such as a second guitar, a percussion rig or a keyboard stack.
  2. Move people to where they really stand. A drummer on a riser, a singer who plays keys and a bassist who prefers the right side all change the plot.
  3. Label what the engineer cannot guess. Add short text labels for things like "own amp" or "in-ear pack" so nobody has to ask.
  4. Count your monitors. Place the wedges you need and ask the venue how many mixes it can provide. Then adjust the plot to what is possible.

When the plot is right, open the tech rider template tab to add contact details, stage size and the equipment you need the venue to supply.

What a template cannot tell you

A template shows a typical arrangement. It does not know that your guitarist plays two amps, your singer uses in-ear monitors or your keyboard player brings three instruments. Treat the preset as a first draft and check every item against your real setup before you send it.

Templates also do not know the room. A small stage may force the drummer to the side, and a large festival stage may supply a drum riser and side fills you did not ask for. Ask the venue for its stage dimensions, and let those decide how much you can spread out.

Stage plot template questions

Can I use a template for a lineup that is not listed?

Yes. Load the preset with the closest instrumentation and edit it. You can delete anything and drag in any other item from the gear library, so a six-piece cover band is a rock preset plus two extra players.

Which side of the plot is stage left?

Stage left is the performer's left when facing the audience. In a top-down plot with the audience at the bottom, that is the left side of the drawing as you look at it.

Do I have to keep the channel numbers from the preset?

No. Edit the names, microphone types and notes freely. If you have already sent a plot to a venue, add new channels at the end rather than renumbering so the engineer's notes stay valid.

How many monitors should I put on the plot?

As many as you need and the venue can supply. Ask the venue how many monitor mixes it offers, then place only those wedges and mark each with its mix number.

Related pages