Input List Template for Bands
An input list is the numbered list of every sound source a band sends to the mixing desk. Edit the channel table above and it stays in step with your stage plot.
What is an input list?
An input list, also called a channel list, tells the sound engineer what will be plugged into each channel of the mixing desk. Each row has a channel number, the source (for example kick drum or lead vocal), the way it is picked up (a microphone or a DI box), and a few notes. The engineer uses it to patch the stage, set up stands and prepare the console before you arrive.
A good list is short, clear and consistent with the stage plot. The editor above builds the channel table from the gear on your plot, so the numbers on the diagram and in the table are always the same.
What each column means
| Column | What to write |
|---|---|
| Channel | The number, matching the number on the stage plot |
| Source | What makes the sound: Kick, Snare, Bass DI, Vocal 1 |
| Mic or DI | The pickup type, such as dynamic mic, condenser mic or DI |
| Phantom power | Whether the channel needs 48 volt phantom power |
| Notes | Anything unusual: own mic, stereo pair, long cable run |
Common channel order
There is no law about channel order, but most engineers expect a familiar sequence because it speeds up patching and soundcheck. A common order starts at the back of the stage and works forward:
- Drums: kick, snare, hi-hat, toms, then overhead microphones.
- Bass, as a DI line, a microphone on the amp, or both.
- Guitars, each amp or acoustic input on its own channel.
- Keyboards, usually as stereo pairs.
- Other instruments such as horns, percussion and strings.
- Vocals, lead first and then backing vocals.
- Playback or laptop lines, last.
If the venue's engineer asks for a different order, follow theirs. They know their console and their routine.
Mic or DI: how to choose
You do not have to name a specific model on a band input list. The type of pickup is enough, and the engineer will use whatever suits the house system. These are common starting points:
- Dynamic microphone: a sturdy choice for loud, close sources such as snare, toms, guitar amps and most vocals.
- Condenser microphone: more sensitive and detailed, often used for overheads, acoustic guitars and some vocals. It usually needs phantom power.
- DI box: converts a line or instrument signal for the desk. Common for bass, keyboards, electronic devices and acoustic guitars with a built-in pickup.
- Amp with a microphone: guitar and bass amps can be miked, or a DI can be taken from the amp or a pedal.
When you bring your own microphone for a particular sound, write "own mic" in the notes so the engineer does not set up a second one.
Phantom power, explained
Phantom power is a small direct current supply, usually 48 volts, sent from the mixing desk down a microphone cable. Condenser microphones and some DI boxes need it to work. Most dynamic microphones do not need it and are not affected. A few microphone types, such as some ribbons, can be damaged by it, so check the maker's guidance and mark those channels clearly.
The phantom power column on the input list lets the engineer switch it on only for the channels that need it, instead of guessing during soundcheck. The editor includes a phantom flag on every channel for this reason.
Stereo sources and shared channels
A stereo keyboard takes two channels, left and right. Give them consecutive numbers and name them clearly, for example "Keys L" and "Keys R". A laptop playback line is also often stereo. Singers who double on another instrument may share a microphone, but if each position needs its own mic, give each one a channel of its own. The channel count is one per microphone or DI line, so count the sources before you decide what to bring.
Limits of an input list
The list covers what goes into the desk. It does not cover what comes out to the monitors, so describe the number of monitor mixes in the tech rider instead. The tool also does not know the size of the venue's console. Ask how many channels it has and trim the list if you are over.
Input list questions
How many channels does a band need?
One per microphone or DI line. Count your sources, remembering that stereo sources take two. Then ask the venue how many channels its console offers.
Should vocals be first or last on the input list?
Either works as long as it is consistent. Many engineers like drums first and vocals last, but if the venue asks for a different order, use theirs.
What does 48V mean on an input list?
It means the channel needs phantom power, a 48 volt supply sent from the mixing desk. Condenser microphones and some DI boxes need it. Mark it so the engineer switches it on only where required.
Do monitors go on the input list?
No. The input list covers sources going in. Describe monitor mixes in the tech rider and show the wedges on the stage plot.